If the fan in your Kia Sorento is not working, it may be due to a faulty fuse. Check the fuse box under the hood and replace any blown fuses. If that doesn’t solve the problem, it could be an issue with the blower motor itself.
Try testing the motor with a voltmeter to see if it’s getting power. If not, you’ll need to replace it.
If your Kia Sorento’s AC fan is not working, there are a few things you can check to try and troubleshoot the problem. First, make sure that the fuse for the AC fan is not blown. If it is, replace it with a new one.
Next, check to see if the fan motor itself is defective. To do this, remove the fan motor and test it for continuity using a multimeter. If the motor is defective, it will need to be replaced.
Finally, if neither of these solutions fixes the problem, then the most likely culprit is a faulty AC control module. This will need to be replaced by a professional mechanic.
Why is My Ac Blower Not Working? Is There a Fuse for the Ac Blower Motor? Why is My Kia Sorento Not Blowing Cold Air? Where is the Blower Motor on a Kia Sorento? 2011 Kia Sorento Blower Moter Fuses, Relays & TroubleshootingKia Sorento Blower Motor Kia Sorento Blower Motor Resistor 2012 Kia Sorento Blower Motor Resistor 2011 Kia Sorento Blower Motor Kia Sorento Blower Motor Replacement 2011 Kia Sorento Blower Motor Location Conclusion
Why is My Ac Blower Not Working?
If your AC blower is not working, there are a few potential reasons why. The most common reason is that the blower motor itself has burned out and needs to be replaced. Other potential causes could include a blown fuse, loose wiring, or a faulty switch.
If you suspect that the blower motor has burned out, the first thing you’ll want to do is check for power at the motor itself. If there is no power going to the motor, then it will need to be replaced. Another way to test if the motor has burned out is by attempting to start the AC unit with the blower off.
If the unit starts without issue, then it’s likely that the blower motor is indeed faulty and will need to be replaced. If you find that there is power going to the blower motor but it still isn’t working, then it’s possible that either a fuse has blown or there is some loose wiring somewhere. To check for a blown fuse, simply locate your AC unit’s fuse box and visually inspect each of the fuses inside.
If any of them appear to be burnt out or broken, then they will need to be replaced before proceeding further. As for loose wiring, this can usually be found near where the power connects to the blower motor itself. Simply tighten any loose connections and see if that solves the problem before moving on to other potential causes.
Finally, another possibility as to why your AC blower might not be working properly could lie in a faulty switch – either on your thermostat or somewhere else in your AC unit’s electrical system. If you suspect this may be the case, consult a professional technician who can help diagnose and fix any underlying issues with your AC unit’s switch(es).
Is There a Fuse for the Ac Blower Motor?
If your AC blower motor isn’t working, there’s a chance that the fuse has blown. To check this, simply locate the fuse box and look for a blown fuse. If you find one, replace it with a new fuse of the same amperage.
Why is My Kia Sorento Not Blowing Cold Air?
If your Kia Sorento is not blowing cold air, there are a few potential causes. One possibility is that the compressor is not working properly. Another possibility is that there could be a problem with the Freon levels in the system.
If the system is low on Freon, it will not be able to cool the air properly. Finally, there could be an issue with one of the valves in the system that is not allowing enough coolant to flow through.
Where is the Blower Motor on a Kia Sorento?
When it comes to finding the blower motor on your Kia Sorento, there are a few things that you will want to keep in mind. First, the blower motor is located under the hood of your vehicle, so you will need to pop the hood and locate it from there. Once you have found the blower motor, it will be attached to the HVAC unit.
The best way to access it is by removing the glove box door and reaching in from there. With all of that said, let’s take a more detailed look at where the blower motor is located on your Kia Sorento. The first thing that you will want to do is open up the hood of your vehicle.
Once you have done this, locate the HVAC unit which is located on the passenger side of the engine compartment. From here, you should be able to see the blower motor attached to the bottom of the unit. In order to access it, you will need to remove the glove box door.
2011 Kia Sorento Blower Moter Fuses, Relays & Troubleshooting
Kia Sorento Blower Motor
If you’re having trouble with your Kia Sorento’s blower motor, there are a few things you can check before taking it in for service. First, make sure that the fuse for the blower motor is not blown. If it is, replace it and see if that fixes the problem.
If not, the next thing to check is the blower motor resistor. This part controls the speed of the blower motor, and if it’s faulty, it could be causing your problem. The last thing to check is the actual blower motor itself.
If none of these other parts are to blame, then it’s likely that the motor has failed and will need to be replaced.
Kia Sorento Blower Motor Resistor
If your Kia Sorento is having issues with the blower motor, it may be due to a problem with the blower motor resistor. The blower motor resistor is responsible for regulating the amount of power that flows to the blower motor. If it fails, it can cause the blower motor to run at full power all the time or not at all.
Symptoms of a failing blower motor resistor include: 1. The fan only works on high speed 2. The fan doesn’t work on any speed
3. The fan only works sometimes If you’re experiencing any of these issues, it’s likely that your Sorento’s blower motor resistor needs to be replaced. Fortunately, this is a relatively easy and inexpensive repair that can be done at home.
2012 Kia Sorento Blower Motor Resistor
If you’re having issues with your 2012 Kia Sorento’s blower motor, it could be the result of a faulty blower motor resistor. This part is responsible for regulating the flow of electricity to the blower motor, and if it isn’t working properly, the blower motor won’t work either. In some cases, the problem may only be intermittent, but it can eventually lead to the complete failure of the blower motor.
Replacing the blower motor resistor is a relatively simple repair that can be done at home with just a few tools.
2011 Kia Sorento Blower Motor
The Kia Sorento is a mid-size SUV that has been produced since 2002. The first generation Sorento was a traditional body-on-frame SUV, but the second generation model, introduced in 2009, was a unibody crossover SUV. The current third generation Sorento debuted in 2015.
For the 2011 model year, Kia made several changes to the Sorento. Most notably, they switched from using a V6 engine to using a more powerful and fuel efficient turbocharged four-cylinder engine. They also made some cosmetic changes, such as updating the front grille and headlights.
One of the issues that can come up with the 2011 Kia Sorento is problems with the blower motor. The blower motor is responsible for circulating air through the vehicle’s ventilation system. If it stops working, then you will not be able to get any air flow through your vents.
There are a few different things that can cause your blower motor to stop working. One possibility is that there is simply a blown fuse. Another possibility is that there is an issue with the electrical connection to the motor itself.
Yet another possibility is that something is physically blocking the airflow, such as leaves or debris caught in the vents themselves. If your blower motor has stopped working, then you will want to troubleshoot it as soon as possible so that you can get your ventilation system up and running again. You can start by checking your fuse box and looking for any blown fuses related to your ventilation system.
If you don’t see any obvious issues there, then you’ll want to check all of the electrical connections going to your blower motor to make sure they are secure and not damaged in any way.
Kia Sorento Blower Motor Replacement
If you own a Kia Sorento, you may eventually have to replace the blower motor. This is a relatively easy process that can be done at home with a few tools. The first thing you’ll need to do is locate the blower motor.
It’s located under the hood, on the passenger side of the engine compartment. Once you’ve found it, disconnect the electrical connector and unscrew the two mounting bolts that hold it in place. With the old blower motor removed, simply install the new one in its place and secure it with the mounting bolts.
Reconnect the electrical connector and start up your Kia Sorento to test out the new blower motor.
2011 Kia Sorento Blower Motor Location
The Kia Sorento blower motor is located in the engine compartment, on the passenger side of the vehicle. It is mounted to the firewall, behind the air filter housing. To access the blower motor, you will need to remove the air filter housing and disconnect the electrical connector from the motor.
If your Kia Sorento’s AC fan is not working, there are a few things you can check to try and fix the issue. First, make sure that the AC compressor is turned on. If it is, then check the fuses to see if they are blown.
If they are, replace them with new ones. Next, check the AC blower motor to see if it is burned out. If it is, you will need to replace it with a new one.
Finally, check the AC condenser to see if it is dirty or blocked. If it is, clean or replace it as needed.